4
Troubleshooting
This section contains information on the following topics:
●
HP Jetdirect Configuration Page
●
LEDs
●
Resetting to Factory Defaults
●
Controlling Network Protocols
HP Jetdirect Configuration Page
The HP Jetdirect Configuration page provides comprehensive print server status. It is an important
diagnostic tool, especially if network communications with the print server is not available.
In most HP LaserJet printers/MFPs, an HP Jetdirect Configuration page will automatically print when
you print a Printer Configuration page. Refer to your printer/MFP documentation for instructions to
print configuration pages.
For a description of messages that may appear on the HP Jetdirect Configuration Page, see the
HP Jetdirect Print Servers Administrator's Guide for your print server model.
LEDs
The HP Jetdirect 695n Print Server contains the following status lights (LEDs) that indicate the
wireless status, the network connection speed, link status, and network activity.
Table 4-1
HP Jetdirect LEDs
LED
Wireless
Connection Status
1000
100
10
Link
Act
ENWW
Color
Description
Blue
Slow Blink — Scanning (blink is approximately once per second).
Blinking — Connected to network (rate depends on data rate).
Constant — No data transfer.
Green
Indicates the link speed, either at 1000 Mbps, 100 Mbps, or 10 Mbps.
Green
When on, indicates that the print server has successfully linked to the network.
Yellow
When blinking, indicates network transmission activity.
HP Jetdirect Configuration Page
17