Table of Contents
Advertisement
Table A-1
HP Jetdirect EIO Menu on Graphical Control Panel (continued)
Menu item
IPX/SPX
AppleTalk
DLC/LLC
Security
Secure Web
IPSEC
or
Firewall
Reset Security
26
Appendix A HP Jetdirect EIO Control Panel Menus
Sub-menu item
Sub-menu item
Enable
Frame Type
Enable
Enable
Print Sec Page
Values and Description
Off
(default): Disable the IPX/SPX protocol.
On: Enable the IPX/SPX protocol.
Selects the frame-type setting for your network.
Auto: Automatically sets and limits the frame type to
the first one detected.
EN_8023, EN_II, EN_8022, and EN_SNAP: Frame-
type selections for Ethernet networks
Off
(default): Disable the AppleTalk protocol.
On: Enable the AppleTalk protocol.
Off
(default): Disable the DLC/LLC protocol.
On: Enable the DLC/LLC protocol.
Yes: Prints a page that contains the current IPsec
security settings on the HP Jetdirect print server.
No
(default): A security settings page is not printed.
For configuration management, specify whether the
embedded Web server will accept communications
using HTTPS (Secure HTTP) only, or both HTTP and
HTTPS.
HTTPS
Required: For secure, encrypted
communications, only HTTPS access is accepted.
The print server will appear as a secure site.
HTTP/HTTPS
optional: Access using either HTTP or
HTTPS is permitted.
NOTE:
The factory default setting depends on the
print server model.
NOTE: IPSEC
will appear on the menu for both
IPsec and Firewall status.
Specify the IPsec or Firewall status on the print
server.
Keep: IPsec/Firewall status remains the same as
currently configured.
Disable: IPsec/Firewall operation on the print server
is disabled.
Specify whether the current security settings on the
print server will be saved or reset to factory defaults.
No
(default): The current security settings are
maintained.
Yes: Security settings are reset to factory defaults.
ENWW
Advertisement
Table of Contents
Troubleshooting
