Restoring The Factory-Programmed Settings - Yamaha PSR-A2000 Owner's Manual

Other character-entry operations
• Deleting characters
Move the cursor to the character you wish to delete by using the [DATA ENTRY]
dial, and press the [7 ▼] (DELETE) button. To delete all characters on the line at
once, press and hold the [7 ▼] (DELETE) button.
• Entering marks or space
1. Press the [6 ▼] (SYMBOL) button to call up the mark list.
2. Use the [DATA ENTRY] dial to move the cursor to the desired mark or space, then
press the [8 ▲] (OK) button.
• Selecting custom icons for files (shown at left of file name)
1. Press the [1 ▼] (ICON) button to call up the ICON SELECT display.
2. Select the icon by using the [A] – [J] buttons, [3 ▲▼] – [5 ▲▼] buttons or [DATA
ENTRY] dial. The ICON display includes several pages. Press the TAB [E][F]
buttons to select different pages.
3. Press the [8 ▲] (OK) button to apply the selected icon.

Restoring the Factory-programmed Settings

While holding the C6 key (right-most key on the keyboard), turn the [
switch on. This restores the all settings to the factory default.
You can also restore a specified setting to the factory default value, or save/load your
own reset settings. Call up the operation display: [FUNCTION] → [I] UTILITY →
TAB [E][F] SYSTEM RESET. For details, refer to the Advanced Features section
(page 189).
C6
NOTE
To cancel the operation, press the
[8 ▼] (CANCEL) button.
] (Standby/On)
NOTE
If you want to initialize only the Regis-
tration Memory setting (page 75),
turn the [
on while holding the B5 key.
PSR-A2000 Owner's Manual
] (Standby/On) switch
31