Part Select Buttons; Part On/Off Buttons - Yamaha PSR-A2000 Owner's Manual

Keyboard Parts
Voices can be assigned independently to each of the three keyboard parts:
Right 1, Right 2 and Left. You can combine these parts by using the PART
ON/OFF buttons to create a rich, ensemble sound.
Lower section of the
keyboard
When the LEFT part is off, the RIGHT 1 and 2 Voices can be played over the
entire keyboard. When the LEFT part is on, keys lower than F#2 (the Split
Point) are set for playing the LEFT part and those higher than the Split Point
are set for playing the RIGHT 1 and 2 parts.
You can confirm the currently selected part by checking which lamp of the
PART SELECT buttons is lit. To select the desired keyboard part, press the
corresponding part button.
Holding the LEFT part Voice (Left Hold)
This function causes the LEFT part Voice to be held even when the keys are
released. Non-decaying Voices such as strings are held continuously, while
decay-type Voices such as piano decay more slowly (as if the sustain pedal
has been pressed).
Upper section of the
keyboard
Split Point (F#2)
NOTE
To change the Split Point, press:
[FUNCTION] → [C] STYLE SETTING/
SPLIT POINT/CHORD FINGERING →
TAB [E][F] SPLIT POINT. For more
information, refer to the Advanced
Features section (page 117).
PSR-A2000 Owner's Manual
1
37