Applying Effects To Each Part - Yamaha PSR-A2000 Owner's Manual

Applying Effects to Each Part

1
Same operation as in the "Basic Procedure" on page 83. In step
2, select EFFECT tab.
2
Use the [C]/[D]/[E] buttons to select the desired effect.
• REVERB:
Reproduce the warm ambience of playing in a concert hall or jazz club.
• CHORUS:
Produces a rich "fat" sound as if several parts are being played
simultaneously.
• DSP:
By default, the most appropriate effect for the selected Voice has been
selected.
3
Use the [1 ▲▼] – [8 ▲▼] buttons to adjust the depth of each
effect for the desired part.
4
Save your settings (step 5 on page 84).
Advanced Features
Refer to the Advanced Features section in this manual, Chapter 8.
Converting XG Song Voice to this instru-
ment's Voice (Song Auto Revoice):
Editing FILTER parameters:
Editing TUNE parameters:
Changing an Effect type:
Editing EQ parameters:
[MIXING CONSOLE] → TAB [E][F] VOL/
VOICE → [G] SET UP
[MIXING CONSOLE] → TAB [E][F] FILTER
[MIXING CONSOLE] → TAB [E][F] TUNE
[MIXING CONSOLE] → TAB [E][F]
EFFECT → [F] TYPE
[MIXING CONSOLE] → TAB [E][F] EQ
NOTE
You can change the effect type by
pressing the [F] (TYPE) button. Refer
to the Advanced Features section
(page 170).
PSR-A2000 Owner's Manual
8
87