Connecting To A Computer - Yamaha PSR-A2000 Owner's Manual

Connecting to a Computer

By connecting a computer to the [USB TO HOST] terminal, you can transfer data
between the instrument and the computer via MIDI, and use the computer to control,
edit and organize data on the instrument.
1
Before connection, turn off the power of this instrument.
2
Start the computer.
Do not start any applications on the computer.
3
Connect the instrument and computer via a USB cable.
Make the connection directly without passing through a USB hub.
4
Turn on the power of this instrument.
The USB-MIDI driver will be installed to the computer automatically.
OS: Windows XP (SP3 or later)/Windows Vista *Only 32-bit, Windows 7,
Mac OS X Version 10.5.0–10.6.x
When data communication is unstable or some problem occurs even though
you've executed the above instructions, download the Yamaha Standard USB-
MIDI driver from the following URL then install it to your computer. For
instructions on installation, refer to the Install Guide included in the package
file.
http://download.yamaha.com/
For details about OS for Yamaha Standard USB-MIDI driver, visit the URL
above.
NOTE
You can also use the MIDI IN/OUT
terminals to connect to a computer. In
this case, a MIDI interface (such as
the Yamaha UX16) is needed. For
more information, refer to the owner's
manual of the MIDI interface.
PSR-A2000 Owner's Manual
10
95