Recording Your Performance As Audio - Yamaha PSR-A2000 Owner's Manual

• Adjusting volume for audio playback
Press the [7 ▼] (VOL.) button then adjust the volume for audio files by using the
[7 ▲▼] buttons. To close the setting display, press the [8 ▲▼] (CLOSE) button.

Recording Your Performance as Audio

Try recording your performance as audio data (WAV file) to a USB flash memory.
The maximum amount of recording time is 80 minutes per recording, though this
may differ depending on the capacity of the particular USB flash memory.
The following parts (internal tone generator) can be recorded.
Keyboard parts (Right 1, Right 2, Left), Song parts, Style parts, Multi Pad parts
File formats recorded by this function
.wav 44.1 kHz sample rate, 16-bit resolution, stereo
1
Connect the USB flash memory to the [USB TO DEVICE]
terminal.
2
Set the desired Voice, etc. which you want to use for your
performance. (For information setting the Voice, see page 34; for
setting the Style, see page 47.)
3
Press the [USB] button.
4
Press the [E] (RECORDER) button to call up the Recording
display (USB AUDIO RECORDER display).
NOTE
To record your performance by USB
Audio function, use the compatible
USB flash memory. Before using a
USB flash memory, be sure to read
"Connecting a USB Storage Device"
on page 93.
NOTE
Input from the [AUX IN] jacks cannot
be recorded.
NOTE
Songs protected by copyright, such
as preset songs, and the metronome
sound cannot be recorded.
NOTE
Recording methods on the instrument
include MIDI recording as well as
audio recording (page 64).
NOTE
The USB storage device of "USB1" is
selected as the recording destination
when multiple USB storage devices
are connected. The destination is
skipped when "USB1" is a floppy disk
drive.
PSR-A2000 Owner's Manual
7
81