Tools > Admin - D-Link DI-604UP - Broadband Router Plus USB Print Server Product Manual

Name
Protocol
Port Range
Bandwidth
Click Apply to set the QoS for IP.
TOOLS > ADMIN
Admin At this page, the DI-604UP administrator can change the system
password. There are two accounts that can access the
Broadband Router's Web-Management interface. They are
admin and user. Admin has read/write access while user has
Enter a user-defined name to define this application for
users on the LAN.
Choose the protocol to be enabled for QoS from the
pull-down menu. The user may choose TCP, UDP or Both.
Enter a virtual port range that will use this application.
Remember these are virtual ports and not physical ports on
the router.
Use the pull-down menu to select the best bandwidth for the
QoS setting on this router. The user may set a bandwidth
between 1Kbps to 32Mbps. Choosing Best Effort will set the
router to allow the first user to access the set application to
have the total bandwidth needed for the file being
transferred. Choosing Full will denote that the router will
allot 100Mbps of bandwidth for the specified QoS
implementation. Only one QoS implementation can be set at
Full.
38