Table of Contents
Advertisement
Quick Links
This product can be set up using any
current web browser, i.e., Internet
Explorer 6x, Netscape Navigator 7x.
Before You Begin
1.
If you purchased this router to share your high-speed Internet connection with other
computers, you must have either an Ethernet-based Cable or a DSL modem with an
established Internet account from an Internet Service Provider (ISP).
2.
It's best to use the same computer that is connected to your modem for configuring
the DI-624S router. The DI-624S Wireless Storage Router acts as a DHCP server
and will assign all the necessary IP address information on your network. See
Appendix at the end of this Quick Installation Guide or the Manual on the CD-
ROM for setting each network adapter to automatically obtain an IP address.
Check Your Package Contents
These are the items included with your DI-624S purchase:
If any of the above items are missing, please contact your reseller.
©2005 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective
holders. Software and specifications subject to change without notice.
• DI-624S Wireless Storage Router with Antenna
• CD-ROM (containing Manual and Warranty)
• Ethernet (Cat.5 UTP/Straight-Through) Cable
• 5V DC, 3 A Power Adapter
DI-624S
AirPlus XtremeG ™
Wireless Storage Router
Using a power
supply with a
different voltage rating
will damage and void
the warranty for this
product.
Advertisement
Table of Contents
Related Manuals for D-Link DI-624S
Summary of Contents for D-Link DI-624S
-
Page 1: Before You Begin
If any of the above items are missing, please contact your reseller. ©2005 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. -
Page 2: Restart Your Computer
624S and the other end to an available Ethernet port on the network adapter in the computer you will use to configure the DI-624S. The LED light for LAN Port 1 will illuminate to indicate proper connection. (Note: Some computers already have network adapters pre-installed.) - Page 3 LED on the front panel should illuminate. Additional devices may be added to your DI-624S to increase functionality. By connecting a printer, network storage device or the D-Link Media Lounge to either of the two USB ports at the back of the router, you may share print capabilities, entertainment media or documents over your wireless or wired network.
-
Page 4: Connected Devices
When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this: Cable or DSL Modem connected to the WAN port. Devices connected to the USB Computers ports. connected to the LAN Ports DI-624S Wireless Storage Router Computers connected on the wireless network... -
Page 5: Using The Setup Wizard
Using The Setup Wizard Open your Web browser and type “http://192.168.0.1” into the URL address box. Then press the Enter or Return key. The logon pop-up screen will appear. Type “admin” the username and leave the password field blank. Click Once you have logged in, the Home screen will appear. - Page 6 You will see the following screens. Click Next Step 1 - Set up your new password. You have the option to establish a password. Click Next Step 2 - Choose your time zone. Click Next...
- Page 7 The Setup Wizard (continued) Select the type of Internet connection for your router. Select one of these settings If you are unsure of which setting to select, please contact your Internet Service Provider. Click Next If you selected Dynamic IP Address, this screen will appear: “Clone MAC Address”...
- Page 8 If your ISP requires a Static IP Address, and this option is selected, then this screen will appear: Enter the IP address information originally provided to you by your ISP. You will need to complete all the required fields. Click Next If your ISP uses PPPoE...
- Page 9 If your ISP uses PPTP and this option is selected, then this screen will appear. Enter the IP address information originally provided to you by your ISP. Click Next If your ISP uses L2PT and this option is selected, then this screen will appear. Enter the IP address information originally provided to you by your...
- Page 10 If your ISP is Big Pond Cable and this option is selected, then this screen will appear. Enter in the username and password provided to you by your ISP and retype that same password to verify it. Click Next After clicking Next in one of the previous screens, the wizard will open to the Wireless installation for your router.
- Page 11 Enter the WEP Encryption key. Enter the WPA-PSK Passphrase. Click Next. Your Setup is Complete! Click Restart...
- Page 12 Click Continue You will be returned to the Home tab.
-
Page 13: Test Your Internet Connection
Test Your Internet Connection Click Exit Relaunch your Web browser (i.e., Internet Explorer or Netscape Navigator), to link to your favorite Web site to test your Internet connection. For additional settings or information, refer to the Advanced, Tools, or Status tabs on the web-management interface;... - Page 14 Here’s how to configure the network adapter to obtain an IP address automatically for the DI-624S Broadband Router. Microsoft Windows XP: Go to Start > right click on My Network Places >...
- Page 15 Apple Macintosh OS X: Go to the Apple Menu and Select System Click on Preferences. Network Select Built-in Ethernet in the Show pull-down menu Select Using DHCP in the Configure pull- down menu Click on Apply Now The IP address information, the Subnet Mask, the Router’s IP address and the Ethernet adapter address will appear.
-
Page 16: Technical Support
Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers within Australia: D-Link Technical Support over the Telephone: 1300-766-868 Monday to Friday 8:00am to 8:00pm EST Saturday 9:00am to 1:00pm EST D-Link Technical Support over the Internet: http://www.dlink.com.au... - Page 17 You can find software updates and user documentation on the D-Link website. Tech Support for customers within South Eastern Asia and Korea: D-Link South Eastern Asia and Korea Technical Support over the Telephone: +65-6895-5355 Monday to Friday 9:00am to 12:30pm, 2:00pm-6:00pm...
- Page 18 Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers within India D-Link Technical Support over the Telephone: +91-22-26526741 +91-22-26526696 –ext 161 to 167 Monday to Friday 9:30AM to 7:00PM D-Link Technical Support over the Internet: http://ww.dlink.co.in...
- Page 19 Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers for the duration of the warranty period on this product. Customers can contact D-Link technical support through our web site or by phone.
- Page 20 Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers within the U.A.E & North Africa: D-Link Technical Support over the Telephone: (971) 4-391-6480 (U.A.E) Sunday to Wednesday 9:00am to 6:00pm GMT+4 Thursday 9:00am to 1:00pm GMT+4 D-Link Middle East &...
- Page 21 You can find software updates and user documentation on the D-Link website. Tech Support for customers within South Africa and Sub Sahara Region: D-Link South Africa and Sub Sahara Technical Support over the Telephone: +27-12-665-2165 08600 DLINK ( For South Africa only )
- Page 22 Technical Support You can find updates and user documentation on the D-Link website Tech Support for Latin America customers: D-Link Technical Support over the followings Telephones: Argentina: 0800-666 1442 Monday to Friday 09:00am to 22:00pm Chile: 800-214 422 Monday to Friday 08:00am to 21:00pm...