MTU
HOME > LAN
LAN is short for Local Area Network. This is considered your internal
network. These are the IP settings of the LAN interface for the DI-604UP.
These settings may be referred to as Private settings. You may change
the LAN IP address if needed. The LAN IP address is private to your
internal network and cannot be seen on the Internet.
IP Address
Subnet Mask
Local Domain Name
Address button to copy the MAC address of the Ethernet Card installed
by your ISP and replace the WAN MAC address with the MAC address
of the router. It is not recommended that you change the default MAC
address unless required by your ISP.
Enter an MTU value only if required by your ISP. Otherwise, leave it at
the default setting.
The IP address of the LAN interface. The default IP
addressis 192.168.0.1.
The subnet mask of the LAN interface. The default subnet
mask is 255.255.255.0.
This field is optional. Enter in the your local domain
name.
19
Need help?
Do you have a question about the DI-604UP - Broadband Router Plus USB Print Server and is the answer not in the manual?
Questions and answers