Getting Started - D-Link DI-604UP - Broadband Router Plus USB Print Server Product Manual

Getting Started

Installation Location
The DI-604UP can be positioned at any convenient place in your office or
house. No special wiring or cooling requirements are needed. However,
you should comply with the following guidelines:
Place the DI-604UP on a flat horizontal plane.
Keep away from any heating devices.
Do not place in a dusty or wet environment.
The recommended operational specifications of the DI-604UP are:
Temperature
Humidity
In addition, remember to turn off the power, remove the power cord from
the outlet, and keep your hands dry when you install the hardware.
Network Settings
To use the DI-604UP correctly, you have to properly configure the network
settings of your computers. The default IP address of the DI-604UP is
192.168.0.1, and the default subnet mask is 255.255.255.0. These
addresses can be changed as needed, but the default values are used in
this manual. If the TCP/IP environment of your computer has not yet been
configured, you can refer to Configuring Your PCs to Connect to the
DI-604UP to configure it.
For example:
1. Configure your computer IP as 192.168.0.3, subnet mask as
255.255.255.0 and gateway as 192.168.0.1
Or more conveniently
2. Configure your computers to obtain TCP/IP settings automatically
from the DHCP server feature of the DI-604UP
Since the IP address of the DI-604UP is 192.168.0.1, the IP address of your
computer must be 192.168.0.X (where "X" is a number between 2 and
254.) Each computer on your network must have a different IP address
within that range. The default gateway must be 192.168.0.1 (the IP
address of the DI-604UP).
℉ ℉
32 ~ 113
10% ~ 95%
10