Table of Contents
Advertisement
3. Routing the cables through the arm unit
If you are installing ELPIU03 (sold separately), you also need to route the USB cable supplied with ELPIU03 through the
arm unit.
Caution
Problems may occur if you use this product without routing the cables through the arm unit.
Route the USB cable that connects ELPIU03 to the computer so that the type B connector emerges on
q
the adjustment unit side.
4. Attaching the wall mount to the wall plate
1)
Attach the hook on the arm plate to the bar on the wall plate.
Be careful not to pinch cables between the arm plate and the wall plate.
2)
Secure the arm plate temporarily using two M8 x 15 mm hexagon socket head cap bolts.
Arm unit
USB cable for ELPIU03
Arm plate
Arm unit
Bar on wall plate
Wall plate
M8 x 15 mm hexagon
socket head cap bolts
(x2)
15
Advertisement
Table of Contents
