Snmp Settings - EnGenius EOC2611P User Manual

EnGenius EOC2611P
4.5.3 SNMP Settings
This option allows you to assign the contact details, location, and community name and trap
settings for SNMP. This is a networking management protocol used to monitor network‐attached
devices. SNMP allows messages (called protocol data units) to be sent to various parts of a
network. Upon receiving these messages, SNMP‐compatible devices (called agents) return data
stored in their Management Information Bases.
SNMP Enable/Disable: Choose to enable or disable the SNMP feature.
Contact: Specify the contact details of the device.
Location: Specify the location of the device.
Read‐Only Community Name: Specify the password for access the SNMP community for read
only access.
Read‐Write Community Name: Specify the password for access to the SNMP community with
read/write access.
Send SNMP Trap: Specify the IP address of the computer that will receive the SNMP traps.
Trap Community Name: Specify the password for the SNMP trap community.
Click on the Apply button to save the changes.
Version 1.0
29