Package Contents; System Requirements - EnGenius EOC2611P User Manual

Security
802.11i WEP, WPA, WPA2 (Encryption support TKIP/AES)
MAC address functions MAC address filter (AP mode)
802.1x IEEE802.1x Authentication
Station isolation
Management
Firmware Upgrade Upgrading firmware via web browser, setting are kept after upgrade
Reset & Backup Reset to factory default. User can export all setting into a file via WEB Interface.
Ping & Trace Route Built‐in PING function & Trace Route function in Web GUI
MIB MIB I, MIB II(RFC1213), Private MIB
SNMP V1, V2c
1.2 Package Contents
Open the package carefully, and make sure that none of the items listed below are missing. Do not
discard the packing materials, in case of return; the unit must be shipped in its original package.
1* EOC2611P
1* PoE injector (EPE‐1212)
1* Power Adaptor (24V/0.6A)
1* CD with User's Manual
1* Quick Installation Guide (QIG)
1* Metal Strap
2* Special Screw Set
1.3 System Requirements
The following are the minimum system requirements in order to configure the device.
PC/AT compatible computer with an Ethernet interface.
Operating system that supports HTTP web‐browser