Time Settings; Log - EnGenius EOC2611P User Manual

EnGenius EOC2611P
5.5.5 Time Settings
This page allows you to configure the time on the device. You may do this manually or by
connecting to a NTP server.
Manually Set Date and Time: Specify the date and time
Automatically Get Date and Time: Select the time zone from the drop down list and then specify
the IP address of the NTP server.
Click on the Apply button to save the changes.
5.5.6 Log
Click on the Log link under the Management menu. The Log page displays a list of events that are
triggered on the Ethernet and Wireless interface. This log can be referred when an unknown
error occurs on the system or when a report needs to be sent to the technical support
department for debugging purposes.
Syslog: Choose to enable or disable the system log.
Log Server IP Address: Specify the IP address of the server that will receive the system log.
Local Log: Choose to enable or disable the local log.
Click on the Apply button to save the changes.
Version 1.0
49