Wireless; Wireless Network - EnGenius EOC2611P User Manual

EnGenius EOC2611P
7.5 Wireless
7.5.1 Wireless Network
The Wireless Network page allows you to configure the Wireless Mode, Channel, SSID, and
Security Settings.
Wireless Mode: Depending on the type of wireless clients that are connected to the network,
you may select B, G, B/G‐mixed or Super‐G. If you are not sure about which clients will be
accessing the wireless networks, it is recommended that you select B/G‐mixed for the best
performance.
SSID: The SSID is a unique named shared amongst all the points of the wireless network. The SSID
must be identical on all points of the wireless network and cannot exceed 32 characters. You may
specify an SSID or select one from the Site Survey.
Site Survey: Click on the Site Survey button in order to scan the 2.4GHz frequency for devices
that broadcast their SSID. Click on the BSSID link to connect to the Access Point. Click on the
Refresh button to re‐scan the frequency.
Under the Wireless section of the left menu, you will see
the following options: Wireless Network, Wireless
Security, and Wireless Advanced Settings. Each option is
described below.
Version 1.0
78