Understanding The Hardware; Hardware Installation; Hardware Description - EnGenius EOC2611P User Manual

2 Understanding the Hardware
2.1 Hardware Installation
1. Place the unit in an appropriate location after conducting a site survey.
2. Plug one end of the Ethernet cable into the Network port of the PoE injector and another end
into your PC/Notebook.
3. Plug one end of another Ethernet cable to AP/Bridge port of the PoE injector and the other end
into you cable/DSL modem (Internet)
4. Insert the DC‐inlet of the power adapter into the 24V port of the PoE injector and the other end
into the power socket on the wall.
This diagram depicts the hardware configuration
2.2 Hardware Description
The images below depict the front and rear panel of the unit.
Front Panel Rear Panel