Wireless; Wireless Network - EnGenius EOC2611P User Manual

4.4 Wireless
4.4.1 Wireless Network
The Wireless Network page allows you to configure the wireless mode, channel, SSID, and
security settings.
Wireless Mode: Depending on the type of wireless clients that are connected to the network,
you may select B, G or B/G‐mixed or Super‐G. If you are not sure about which clients will be
accessing the wireless networks, it is recommended that you select B/G‐mixed for the best
performance.
Channel / Frequency: Select a channel from the drop‐down list. The channels available are based
on the country's regulation.
Auto: The EOC2611P will scan nearby wireless signals and choose the channel with the least
interference.
AP Detection: Press the Scan button to find nearby wireless signals.
Current Profiles: User can configure each SSID. EOC2611P supports 4 SSIDs, user can decide to
use how many SSID via "Enable" or not. When click "Edit" button, you can setup details, include
SSID, VLAN ID and Security Mode.
Profile (SSID) Isolation: When you select this function to enable, unit can isolate all profiles(SSIDs)
from each other using VLAN standard.
The Wireless section of the left menu has the following
options: Wireless Network, Wireless MAC Filter, WDS
Link Settings, and Wireless Advanced Settings. Each
option is described below.