Connecting To A Usb Interface - Canon MF7280 - ImageCLASS B/W Laser Network Manual

Connecting to a USB Interface

You can connect the machine to a computer with a USB port via a USB cable. The
machine is USB 2.0 Hi-Speed compatible. The printer drivers, USB class driver,
and utility that matches the operating system on your computer will be installed. For
more information on installing the printer driver through a USB connection, see
"Install Driver Software," in the Starter Guide.
CAUTION
If you connect or disconnect the USB cable while the main power switch is ON,
do not touch the metal parts around the connector, as this may result in
electrical shock.
IMPORTANT
•
Do not connect or disconnect the USB cable in the following situations, as it may cause
your computer or the machine to operate poorly:
- When installing the printer driver
- When the computer is booting up
- When printing
•
If you disconnect the USB cable with the computer or machine's main power switch ON,
always wait at least five seconds before reconnecting the cable. Immediately
reconnecting the cable may cause your computer or machine to operate poorly.
Printer Driver Software
USB Cable
USB Port
USB Connector
Connecting the Machine
2
2-5