Canon MF7280 - ImageCLASS B/W Laser Network Manual page 33

● If you do not want to set or browse detailed information on the
machine with a Canon printer driver or utility:
❑
On the Network Settings screen, press [▼] or [▲] until [Enable Dedicated Port]
appears ➞ press [Enable Dedicated Port].
❑
Press [Off].
❑
Press [OK].
The display returns to the Network Settings screen.
IMPORTANT
•
If you want to use a Canon printer driver or utility, press [On] for both <Use SNMP>
and <Enable Dedicated Port>.
•
You can restrict the IP addresses of computers on which items can be set or
browsed. If you restrict the IP addresses, it is not possible to set or browse detailed
information concerning the machine on computers other than those whose IP
addresses are allowed, even if both <Use SNMP> and <Enable Dedicated Port>
are 'On'. For details, see "Protocol Settings," on p. 3-3.
3
Press [Done] repeatedly until the Additional Functions screen
closes.
4
Restart the machine.
❑
Turn OFF the machine, wait at least 10 seconds, and then turn it ON.
NOTE
For instructions on how to turn ON/OFF the machine, see Chapter 1, "Before You
Start Using This Machine," in the Reference Guide.
The communication environment setup is complete. Proceed to Chapters 3 or 4.
Communication Environment Setup
2
2-15