Konica Minolta bizhub C451 User Manual page 395
Bizhub c451 fk-502 fax operations user guide
Hide thumbs
Also See for bizhub C451:
- User manual (808 pages) ,
- Copy operations (610 pages) ,
- Operation manual (304 pages)
Table of Contents
Advertisement
Utility mode
10
Enter the transmission source information (fax number) of transmission
source using numeric keypad, [+], [Space], [←] or [→].
–
[+]: + is entered.
–
[Space]: Space is entered.
–
[←]: Moves the cursor to the left.
–
[→]:Moves the cursor to the right.
–
[Delete]: Deletes 1 character at a time located at the position of cur-
sor. When cursor is at right side, it gets deleted from the end.
–
In case of actual communication, [+], [space] is ignored.
–
To delete all entered characters, press [C] (clear) key on the control
panel.
11
Specify the forwarding destination.
–
To specify from registered destinations, touch [Select from Address
Book], specify the forwarding destination and then touch [OK].
–
To directly specify the box number, touch [Search by User Box
Number] and enter the Box number with the keypad.
–
Box No. can be specified within the range of 1- 999999999.
–
The Relay User Box is out of scope of the sorting destination.
12
Touch [OK].
13
Touch [OK] and then touch [OK] of the next screen.
TSI reception sorting is set.
14
Touch [Close] until it returns to Fax/Scan screen.
C451
10
10-89
Advertisement
Table of Contents
