Specifying Relay Box Settings; Registering Relay User Box - Konica Minolta bizhub C451 User Manual

Registering/Specifying Settings
9.8

Specifying Relay box settings

Relay broadcast function that uses F-code can be used in this machine. The
[Relay RX] of the Utility mode should be set to [ON] and the Relay User Box
should be registered for using this machine as intermediate relay station.
Maximum 5 Relay User Box can be registered.
!
Detail
Notify the set details to the originating station that sends the original.
The Terminating Station information should be registered as a group des-
tination in advance to use the relay distribution function.

Registering Relay User Box

!
Detail
Relay User Box can be registered from "PageScope Web Connection".
For details on the using PageScope Web Connection, refer to the User's
Guide [PageScope Web Connection Operations].
1
Press [Utility/Counter] key to display the Utility mode screen.
2
Touch [One-Touch/User Box Registration].
– In the Utility mode, the number displayed on button can be entered
and selected on the keypad. For [One-Touch/User Box Registra-
tion], enter [1] on the keypad.
– [One-Touch/User Box Registration] cannot be registered or
changed when [Registering and Changing Address] is set to [Re-
strict] in the Utility mode. Contact the administrator to register or
change the [One-Touch/User Box Registration].
C451
9
9-42