Developer Tie Plate - Tektronix Z780N - Phaser 780 Color Laser Printer Reference Manual

Developer tie plate

1. Remove the lower exit assembly as described in "Lower exit assembly"
on page 128.
2. Remove the rear cover.
3.
Remove the inner cover.
4.
Remove the wire and wire clamp from the developer tie plate.
5. Remove the two screws securing the developer tie plate to the rear of
the printer frame.
6. Remove the two screws securing the developer tie plate to the front of
the printer frame.
7.
Slide the tie plate up and out of the printer frame.
Reverse these steps to install the developer tie plate.
102
Phaser 780 Color Printer