Printing Samplers From A Macintosh - Tektronix Z780GN - Phaser 780 Graphics Color Laser Printer Advanced Features And Troubleshooting Manual

5
Using Color

Printing samplers from a Macintosh

66 Phaser 780 Color Laser Printer
N
O T E
Use the same color correction to print the chart and to print from your application.
Any other color correction selection in the driver causes colors to print differently
than expected.
Installing color correction files
1.
From the printer's CD-ROM, run the Installer application. Select Custom
Install.
2.
In the dialog box, select Printer Utilities and Samplers; click Install. Go to the
next topic, "Downloading a color correction file".
Selecting a color correction file
Select a color correction file in one of three ways: the front panel, PhaserLink
Software, or download a PostScript utility file. The color correction files are as
follows:
Automatic
Commercial Press
DIC
Euroscale Press
FujiProof
No Color Correction
SNAP Press
sRGB Display
SWOP Press
Toyo
Vivid Color
Downloading a color correction file
N
O T E
You can achieve the same result by setting the color correction at the front panel.
1.
From your computer's hard disk, open the PhaserTools folder.
2.
Double-click Apple Printer Utility; a Printer Selector dialog box appears:
a.
Under AppleTalk Zones, select your printer's zone.
b.
Under Printers, select your printer.
c.
Click Open Printer.
3.
From the File menu, select Send PostScript File.