Tektronix Z780GN - Phaser 780 Graphics Color Laser Printer Advanced Features And Troubleshooting Manual page 19

8.
Scroll to the preset timeouts, then press Select to activate your selection.
N
O T E
You can also enable Check Print and control the default timeout through
PhaserLink software. For details on PhaserLink software, refer to the PhaserShare
Networking Manual on the printer's CD-ROM or web site.
Use Check Print
1.
In a supported driver, select Check Print:
LaserWriter 8.3.4 driver:
In the Print dialog box, click Options.
LaserWriter 8.5.1 driver:
In the Print dialog box, use the Printer-Specific Options pull-down
menu.
Windows 95 / Windows 98 PostScript driver:
In the Device Options tab, click Printer features.
Windows NT driver:
Under the Properties tab, select the Advanced tab; in the Document
Options tab, select Printer features.
Adobe PS3 driver for Windows 3.1:
Features tab options.
2.
Check your first print. At the front panel's Check Print message, press
one of these buttons:
Cancel
Continue
Cancels the print job.
Prints the entire print job.
Advanced Features and Troubleshooting Manual
Advanced Print Features
2
11