Lexmark E320 - Printer - B/W Service Manual page 168

4500–E320/E322
USB port
This menu item lets the user enable or disable the USB port. If the
port is not being used, disabling it frees allocated memory to be
used to process print jobs.
Perform the following steps to change the USB port setting:
1. Enter the configuration mode. See
page 3-14
2. Perform a double button press eight times. This moves to the
USB port item on the configuration menu. The USB port (Paper
Jam) light is blinking.
3. The current USB port setting is indicated by the off/on/auto
(Press Button) light. When the light is off, the USB port is
disabled. When the light is blinking, the USB port is enabled.
Perform a brief button press to select a different USB port
setting.
4. Perform a long button press. All lights blink once, indicating the
setting is saved.
5. Exit the configuration mode by turning the printer power off.
Off/on/auto
❍
●
✳
3-32
Service Manual
for more information.
Setting value
USB port is disabled. The printer doesn't receive data
from the USB port.
USB port is enabled with a fixed buffer size. The buffer
size is set from a utility such as MarkVision.
Note: This light state is only displayed if the current value
for the USB port enabled setting is a fixed value. The user
can't set the value by pressing the button to cycle from
the off value to the on value, that is, the button press
cycles from off to auto.
USB port is enabled with an automatic buffer size. The
printer determines the buffer size based on available
memory and other printer settings.
"Configuration mode" on