Using The Special Function Menu (E220/E321/E323) - Lexmark E320 - Printer - B/W Service Manual

4500

Using the special function menu (E220/E321/E323)

To access the printer settings, special functions, and diagnostics:
1. Turn the printer off.
Press and hold the buttons in the following table for the operation
needed.
2. Turn the printer on.
3. Press and hold the buttons until the lights cycle on the operator
panel.
Operation
Enter configuration
menu mode
Print the print quality
test pages
Enter diagnostics
mode
Print the print quality
test pages
Reset NVRAM and
enter normal mode
4. In the configuration or diagnostics mode (four top lights on), press
and hold Continue to print instructions and a map of possible
settings and functions. Menu items are above the dotted line, while
settings are below the dotted line. Follow the instructions to make the
desired changes or enter special function.
2-106
Service Manual
Power–on action
• Power on with top cover open and Continue
pressed.
• Close cover once the Error light is displayed.
Top cover open with Continue pressed. (Cartridge
lockout function enabled).
• Power on with top cover open and Continue
pressed.
• Close cover once the Error light is displayed.
• With the top four lights on solid, press and hold
Continue until lights blink.
• Power on with top cover open and Cancel
pressed.
• Close cover once the Error light is displayed.
Top cover open with Cancel pressed. (Cartridge
lockout function disabled).
• Power on with top cover open and Continue
pressed.
• Close cover once the Error light is displayed.
• With the top four lights on solid, press and hold
Continue until lights blink.
• Power on with top cover open and both Continue
and Cancel buttons pressed.
• Close cover once the Error light is displayed.