Configuration Menu Selections; Utilities - Lexmark E250DN - Govt Laser 30PPM Special Build Mono Taa Service Manual

4512-220, -230

Configuration menu selections

To enter Configuration menu:
1.
Turn off the printer.
2.
Open the front access cover.
3.
Turn on the printer while pressing and holding
4.
Close the cover once the light displays.
Print menus by pressing and holding

Utilities

Use the Utilities menu to troubleshoot printer problems.
Setting Use setting to
Reset Factory Return the printer settings to factory default values.
Defaults
Sometimes resetting the printer to the original settings solves formatting problems.
All menu items are reset to the factory default values except:
Resources in flash memory are unaffected.
Hex Trace Help isolate printing problems when
unexpected characters print or
characters are missing.
Hex Trace helps determine if there is a
problem with the language interpreter or
the cable by providing information about
what the printer is receiving.
To exit Hex Trace, turn off the printer.
Print Quality Test Help isolate print quality problems, such as streaking. Four pages print to help evaluate print
Pages quality:
Reset Photo- Return the photoconductor counter to zero.
conductor Counter
The replace photoconductor message should be cleared only when the photoconductor kit has
been replaced.
3-4
Lexmark™ E250d and E250dn
until the lights flash.
• All settings in the Parallel menu, Network menu, and USB menu.
• All downloaded resources (fonts, macros, and symbol sets) in printer memory (RAM) are
deleted.
• A text page with printer information, cartridge information, current margin settings, and a
graphic.
• One page is gray with graphics, one is black, and one is blank.
.
Values
Off (default)
On