Lexmark E250DN - Govt Laser 30PPM Special Build Mono Taa Service Manual page 101

Auto comp removal
1.
Remove the duplex. See
2.
Remove the auto comp clutch.
3.
Use a spring hook or a small screwdriver to rotate the latch toward the bottom of the printer until it is
pointing downward.
4.
Lay the printer on its top. Be sure to protect it from marring.
5.
Raise the auto comp, and unhook the counter balance spring (A).
"Duplex removal" on page
See"Auto comp clutch removal" on page
4-18.
4-10.
4512-220, -230
4-9
Repair information