Lexmark E250DN - Govt Laser 30PPM Special Build Mono Taa Service Manual page 129

Paper exit guide assembly removal
1.
Remove the rear cover. See
2.
Remove the one screw above the reversing solenoid. See
3.
Remove the three screws (A).
4.
Lift the back of the top cover (right side in photo) to prevent the gears on the assembly from touching other
items while removing, especially the fuser mounting bracket.
5.
Remove the paper exit guide assembly.
"Rear cover removal" on page
A
4-6.
"Top cover removal" on page
Repair information
4512-220, -230
4-7.
4-37