Emerson Oxymitter 4000 Instruction Manual page 51

Oxymitter 4000
Power Requirements:
Probe Heater ...........................................
Electronics ...............................................
Maximum .................................................
SPS 4000
Mounting ..................................................
Materials of Construction:
Manifold/Electronics Enclosure ...............
Mounting Brackets ...................................
Pneumatic Fittings ...................................
Pneumatic Tubing ...................................
Assembly Hardware ................................
Humidity Range .............................................
Temperature Range in Electronics Housing ..
Electrical Classification ..................................
Explosion-Proof Option (both pending) .........
Electrical Feedthroughs ................................
Input Power ...................................................
Power Consumption ......................................
External Electrical Noise ...............................
Handshake Signal to/from
Oxymitter 4000 (self-powered) ................
Cal Initiate Contact Input from Control Room
Relay Outputs to Control Room ....................
Cabling Distance between
SPS 4000 and Oxymitter 4000 ................
Piping Distance between
SPS 4000 and Oxymitter 4000 ................
Approximate Shipping Weight .......................
Fisher-Rosemount has satisfied all obligations coming from the European legislation to harmonize
the product requirements in Europe.
Rosemount Analytical Inc. A Division of Emerson Process Management
Self-powered (+5 V), in series with 340 ohms
Conduit ports — 3/4 in.-14 NPT (one threaded hole for
both analog output and logic I/O)
175 W nominal
10 W nominal
500 W
Integral to Oxymitter 4000
Remote from Oxymitter 4000
Aluminum
316 stainless steel (SS)
1/8 in. brass NPT (SS optional)
1/4 in. Teflon (SS optional)
Galvanized and stainless steel
100% relative humidity
-40° to 185°F (-40° to 85°C)
NEMA 4X (IP56)
ATEX EExd IIB + H2 (Class 1, Division 1, Group B,C,D)
1/2 in. NPT
90 to 250 VAC, 50/60 Hz
5 VA maximum
EN 50 082-2, includes 4 kV electrostatic discharge
5 V (5 mA maximum)
5 VDC (self-powered)
5 to 30 VDC, Form A (SPST)
(one "In-Cal", one "Cal Failed")
Maximum 1000 ft (303 m)
Maximum 300 ft (91 m)
10 lbs (4.5 kg)
Instruction Manual
IB-106-340 Rev. 3.0
December 2003
Description and Specifications 1-15