Download  Print this page

Technical Data; Consumption Values; Installation - Electrolux EDC47130W User Manual

Sensor dry 7kg condenser dryer
Hide thumbs


16 something not working | technical data | consumption values electrolux
If you are unable to identify or solve the
problem, contact our service centre. Before
phoning, make a note of the model, serial
number and purchase date of your machine:
the Service Centre will require this information.
Important: if you call out an engineer to a
fault listed on page 15, or to repair a fault
caused by incorrect use or installation,
a charge will be made even if the appliance
is under warranty.

Technical data

Electrical connection
Voltage – Overall power
– Fuse
Depth with loading door
Maximum Load
Width 60cm
Height 85cm
Depth 58cm
Information on the
electrical connection is
given on the rating plate
on the inner edge of the
appliance door
Cotton 7kg
Synthetics 3kg
+ 5°C + 35°C


Slide out the polyethylene bag with the
polystyrene stuffing before using the appliance.
Pull off the adhesive strips from the top of drum
inside the machine.
Please Note: If this appliance is supplied
from a cord extension set or electrical
portable outlet device it must be positioned
so that it is not subject to splashing or
ingress of moisture.
The tumble dryer must not be installed
behind a lockable door, a sliding door or a
door with a hinge on the opposite side to that
of the tumble dryer in such a way that a full
opening of a tumble dryer door is restricted.
It is recommended that, for your convenience,
the machine is positioned close to your
washing machine.
The tumble dryer must be installed in a
clean place, where dirt does not build up.
Air must be able to circulate freely all around
the appliance. Do not obstruct the front
ventilation grille or the air intake grilles at
the back of the machine.
To keep vibration and noise to a minimum when
the dryer is in use, it should be placed on a firm,
level surface.

Hide quick links:



  Also See for Electrolux EDC47130W