Table of Contents
Advertisement
Problem
The display shows Err.
The display shows (e.g. E51).
1) After maximum 5 hours, the programme ends automatically.
2) It can happen that some area remains humid when drying big items (e.g. bed sheets ).
If the drying results are not
satisfactory
• The set programme was incorrect.
• The filter is clogged.
• The condenser is clogged.
• There was too much laundry in the
appliance.
• The drum is dirty.
• Incorrect setting of the conductivity
sensor ( See chapter "
13. TECHNICAL DATA
Height x Width x Depth
Max. depth with the appliance door open
Max. width with the appliance door open
Adjustable height
Drum volume
Maximum load volume
Voltage
Frequency
Sound power level
Total power
Energy efficiency class
Energy consumption on the standard cot‐
ton programme with the full load.
Energy consumption on the standard cot‐
ton programme with the partial load.
Possible solution
If you want to set a new programme, de‐
activate and activate the appliance.
Make sure that the options are applicable
to the programme.
Deactivate and activate the appliance.
Start a new programme. If the problem
occurs again, contact the Service.
Settings -
850 x 596 x 570 mm (maximal 594 mm)
1039 mm
958 mm
850 mm (+ 15 mm - feet regulation)
104 l
7 kg
230 V
50 Hz
66 dB
2800 W
B
4,23 kWh
1)
2,29 kWh
2)
Adjustment of the remaining laundry
moisture degree " for better setting).
• The airflow slots are clogged.
• Room temperature is too low or too
high ( optimal room temperature 19°C
to 24°C )
ENGLISH
17
Advertisement
Table of Contents
