What To Do If; Troubleshooting By Yourself - Electrolux LAVATHERM 58840R User Manual

What to do if ...

Troubleshooting by yourself

If, during operation, the error code
Switch the machine off and on again. Reset programme. Press the START PAUSE
START PAUZE button If the error is still displayed, please inform your local Service
Force Centre and quote the error code.
Problem
Dryer does not work.
Drying results
unsatisfactory.
Loading door does not
close.
When a button is
Err
pressed, appears on
the LCD.
E...
Possible cause
Mains plug is not plugged in or fuse
is not working correctly.
Loading door is open.
Have you pressed the START PAUSE
START PAUZE button?
Wrong programme selected.
Lint filters clogged.
Fluff filter clogged.
Heat exchanger clogged with lint.
Overloading of laundry.
Ventilation slots in base area cov-
ered up.
Residue on inside surface of drum
or drum ribs.
Conductance of water at installa-
tion site differs from standard set-
ting of machine.
Fine strainer not in place and/or
mesh filter not locked in place.
Washing protection. After the start
of the programme, the option can
no longer be set.
plus number or letter) appears on the LCD:
Plug in at mains socket. Check fuse
in fuse box (domestic installation).
Close loading door.
Press the START PAUSE START
PAUZE button again.
Select a different programme the
next time you dry (see "Programme
chart" chapter).
Clean lint filters.
Clean fluff filter.
Clean heat exchanger.
Observe recommended loading vol-
umes.
Uncover ventilation slots in base
area.
Clean inside surface of drum and
drum ribs.
Make an adjustment using the
DRYNESS DROOGTEGRAAD func-
tion (see chapter "Daily use")
Re-programme standard setting
for degree of drying (see 'Program-
ming options' chapter).
Install fine strainer and/or snap
large mesh filter into place.
Turn the programme knob to OFF
UIT. Set the programme again.
What to do if ...
Remedy
31