Electrolux LAVATHERM 58840R User Manual page 39

The door stop may only be changed by a specialist. If necessary, please contact our
after-sales service or your specialist dealer.
WARNING!
Before changing the door stop, disconnect the mains plug.
1. Open loading door.
2. Unscrew hinge A from the front of the
machine and take off the loading door.
Remove cover plates B and C. To do this,
3.
insert a thin screwdriver into the slots as
shown in the illustration, press down-
wards slightly and pry out the cover
plates.
4. Use an appropriate tool and exert pres-
sure to unfasten locking block D from
the snap-on fixture, take out and re-in-
sert on the other side having rotated the
block through 180°.
Unscrew hinge A from the loading door,
5.
rotate through 180°, re-insert on the
opposite side and screw down.
Re-insert cover plates B and C on the opposite site having first rotated them
6.
through 180°.
Installation
A
B
A
39
C
D
C