Cleaning Heat Exchanger - Electrolux LAVATHERM 58840R User Manual

28 Care and cleaning
2. Pour condensed water out into a ba-
sin or similar receptacle.
3. Slide outlet connections in and refit
condensate tank.
If the programme has been interrup-
ted as a result of the condensate tank
being full: Press the START PAUSE
START PAUZE button to continue the
drying cycle.
The condensate tank has a volume of approx. 4 litres. This is sufficient for around
7 kg of laundry which has previously been spun at 1000 revolutions/ minute.
The condensate can be used as distilled water, e.g. for steam ironing. However first
filter the condensate (e.g. with a coffee filter) to remove any residue and small
pieces of fluff.

Cleaning heat exchanger

If the HEAT EXCHANGER
CAUTION!
Operating when the heat exchanger is blocked with fluff can damage the dryer.
This also increases energy consumption.
1. Open door.
2. Open door in plinth. To do this, press
the release button on the bottom of
the door aperture and open the door
in the plinth to the left.
3. Clean fluff from the inside of the
door and the heat exchanger front
chamber. Wipe the door seal with a
damp cloth.
is displayed, the heat exchanger needs to be cleaned.