General - Sony STR DA2400ES - 7.1 Channel Home Theater AV Receiver Service Manual

Front panel
(DA2400ES)
Status of the POWER button
The receiver is turned off (initial setting).
The ON/STANDBY lamp lights off.
Press POWER to turn the receiver on. You cannot
turn the receiver on using the remote.
Name Function
POWER Press to turn the
receiver on or off.
ON/STANDBY Lights up in green
lamp when the receiver is
turned on. Lights up in
red when the receiver is
set to standby mode.
TONE MODE Adjusts the tonal
quality (bass/treble
TONE +/–
level) of the front,
center and surround
speakers. Press TONE
MODE repeatedly to
select bass or treble
level, then turn TONE
+/– to adjust the level.
TUNING MODE Press to select the
tuning mode.
TUNING +/–
Turn to scan a station.
Remote
Receives signals from
sensor remote commander.
MULTI
Lights up when multi
CHANNEL channel audio signals
DECODING are decoded.
lamp
SECTION 2

GENERAL

To remove the cover
Press PUSH.
When you remove the cover, keep it out
of reach from children.
(Off)
Name
Display
window
Digital Cinema
Sound lamp
DISPLAY
INPUT MODE
MASTER
VOLUME
INPUT
SELECTOR
(On/Standby)
Press / on the remote to turn the receiver on or
set it to the standby mode.
When you press POWER on the receiver, the
receiver will be turned off.
Function Name
The current status of
the selected component
or a list of selectable
items appears here.
Lights up when a sound
field with is
selected.
Press repeatedly to
select information
displayed on the
display.
Press to select the input
mode when the same
components are
connected to both
digital and analog
jacks.
Turn to adjust the
volume level of all
speakers at the same
time.
Turn to select the input
source to play back.
STR-DA2400ES/DG920
This section is extracted
from instruction manual.
Function
2CH/A.DIRECT Press to select sound
field.
A.F.D.
MOVIE
MUSIC
DIMMER Press repeatedly to
adjust brightness of the
display.
MEMORY/ Press to store a station
ENTER or enter the selection
when selecting the
settings.
AUTO CAL MIC
Connects to the
jack supplied optimizer
microphone for the
Digital Cinema Auto
Calibration function.
VIDEO 2 IN/ Connect to a portable
PORTABLE AV audio/video component
IN jacks such as a camcorder or
video game.
SPEAKERS Press to select the
(OFF/A/B/A+B)
speaker system.
PHONES jack
Connects to
headphones.
7