Table of Contents
Advertisement
Chapter 5 General Information
Front Panel
(1) POWER switch
[2] Infrared emitter and sensor
Emits and receives infrared signal commands.
(3) IR (InfraRed) emitter indicator
Lights up when the unit sends out an infrared signal.
(4) TAPE MONITOR button
Press to monitor the original sound while recording a
program source.
(5) TAPE MONITOR indicator
Lignts up during tape monitoring.
(6) VIDEO1
Selects the video unit connected to the VIDEO1
connectors (playback and recording).
VIDEO2
Selects the video unit connected to the VIDEO2
connectors (playback and recording).
VIDEO3
Selects the video unit connected to the VIDEO3
connectors (playback only).
(9] ViDEO4
Selects the 8mm video unit connected to VIDEO4
connectors (playback only).
Display
Shows the functions or the tuning frequency etc..
{i} LD (Laser Disc)
Selects the laser disc player connected to the LD
connectors.
40
(12) DAT/MD (Digital Audio Tape/MiniDisc)
Selects the DAT deck or MiniDisc recorder connected to
the DAT/MD connectors.
CD (Compact Disc)
Selects the compact disc player connected to the CD
connectors.
TUNER (pages 21, 22, 23)
Selects the tuner.
PHONO
Selects the phono player connected to the PHONO
connectors.
MASTER VOLUME (page 17)
Turn to adjust the volume.
[i7] HEADPHONES
Connects stereo headphones.
(8) SPEAKERS (ON/OFF)
Press to turn the speakers on or off.
PRESET TUNING (- / +) (pages 21, 22, 23)
Press to select preset radio stations.
SOUND FIELD (ON/OFF)
Press to turn the selected sound field on and off.
VIDEO4 INPUT jacks
For connecting input from an 8mm video unit.
Advertisement
Table of Contents
