Download  Print this page

Advertisement

FM AUTO STOP CHECK
signal
generator
set
Procedure:
1. Turn on the set.
2. Input the following signal from signal generator to FM antenna
input directly.
Carrier frequency : A = 87.5 MHz, B = 98 MHz, C = 108 MHz
Deviation
: 75 kHz
Modulation
: 1 kHz
ANT input
: 1 kHz
Note: Use 75 ohm coaxial cable to connect signal generator and the set.
You cannot use video cable for checking.
Use signal generator whose output impedance is 75 ohm.
3. Set to FM tuner function and scan the input FM signal with
automatic scanning.
4. Confi rm that input frequency of A, B and C are detected and
automatic scanning stops.
When the station signal is received in good condition, automatic
scanning stops.
STR-DA2400ES/DG920
25

Advertisement

Table of Contents

   Also See for Sony STR DA2400ES - 7.1 Channel Home Theater AV Receiver

   Related Manuals for Sony STR DA2400ES - 7.1 Channel Home Theater AV Receiver

This manual is also suitable for:

Str-da2400esStr-dg920

Comments to this Manuals

Symbols: 0
Latest comments: