Chapter  Power Saving Function; Setting The Power Saving [Power Save]; Setting Power Indicator [Power Indicator] - Eizo RADIFORCE RX220 User Manual

Chapter  Power Saving Function

-1. Setting the Power Saving [Power Save]

This function allows you to set the monitor into the power saving mode according to the PC status.
When the monitor enters the power saving mode, no image is displayed on the screen.
Attention
Turning off the main power switch or unplugging the power cord completely shuts off power supply to the
•
monitor.
Devices connected to the USB port (upstream and downstream) work when the monitor is in power saving
•
mode or when the power switch of the monitor is Off. Therefore, power consumption of the monitor varies with
connected devices even in the power saving mode.
Power Save is compliant with the following standards for the respective signal inputs.
Analog signal
Digital signal
Procedure
Choose <PowerManager> from the Adjustment menu, and press
1.
Choose <Power Save> from the <PowerManager> menu, and press
2.
Select "On" or "Off" with
3.
4. Press
Power Saving System
The monitor enters the power saving mode in conjunction with the PC settings.
Operating
Power saving

-. Setting Power Indicator [Power Indicator]

The brightness of the power indicator (blue) when the screen is displayed can be adjusted (default setting
is set to light up when power is turned on, and brightness is set to 4).
Procedure
Choose <PowerManager> from the Adjustment menu, and press
1.
Choose <Power Indicator> from the <PowerManager> menu, and press
2.
Select the indicator brightness "Off" or in the range from 1 to 7 with
3.
4. Press
signal inputs
DVI
DisplayPort
or
to exit the adjustment.
PC
Operating
STAND-BY
Power saving
SUSPENDED
OFF
to exit the adjustment.
Standard
VESA DPMS
DVI DMPM
DisplayPort Standard V1.1a
.
Monitor Power
Green
Orange
Chapter 4 Power Saving Function
.
.
Indicator
.
.
or as desired.