Mode Preset Function <Setup>-<Mode Preset; Power Saving Function <Powermanager - Eizo RadiForce RX320 User Manual

3. Adjustment and Settings
-. Mode Preset Function <Setup>-<Mode Preset>
When CAL Switch mode is selected, the computer can be forced to display only specified
modes. Use this function when the display modes are restricted or when the display should
not be changed needlessly.
[How to set]
1. Select <Mode Preset> in the ScreenManager <Setup> menu.
2. Set each mode to "On" or "Off".
NOTE
• You cannot disable all modes. Set one or more modes to "On".
[How to cancel]
1. Select <Mode Preset> in the ScreenManager <Setup> menu.
2. Set the mode that you wish to display to "On".
-. Power Saving Function <PowerManager>
The <PowerManager> menu in the ScreenManager enables to set the power saving.
NOTE
• Do your part to conserve energy, turn off the monitor when you finished using it.
Disconnecting the monitor from the power supply is recommended to save energy
completely.
• Even if the monitor is in a power saving mode, USB compliant devices function when
they are connected to the monitor's USB (both the upstream and the downstream ports).
Therefore, power consumption of the monitor will change according to the connected
devices even if the monitor is in a power saving mode.
This monitor complies with the "DVI DMPM" (p. 39).
[How to set]
1. Set the PC's power saving settings.
2. Select "DVI DMPM" in the <PowerManager> menu.
[Power saving system]
On
Power saving/ Off mode
[Power Resumption Procedure]
Operate the mouse or keyboard to return to a normal screen.
Power on the PC to return a normal screen from the Off mode of the PC.

PC
Operation
Power saving
Monitor Power Indicator
Green
Orange