Table of Contents
Advertisement
4 Using the Monitor for a Long Time
The monitor can be set to enter the power saving mode according to the PC status. The life
of the monitor backlight can be extended by setting the monitor to enter the power saving
mode when the monitor is not used.
4.1 Setting the Power Saving Mode
You can specify whether the monitor enters the power saving mode according to the PC
status.
1. Select "Preferences" from the Setting menu, then select
2. Select "Power Save" and then
3. Use
or
Setting
High
Turns the backlight off. This provides the highest power saving effect.
Low
Sets the backlight to the lowest lighting level. The time until operation stabilizes after
restoring from power saving mode can be reduced.
Off
Does not enable the power saving mode. The backlight lights up irrespective of the PC
status. This setting may shorten the backlight life.
Attention
• When not using the monitor, you can turn off the main power supply or disconnect the power
plug so that the power is cut completely.
• Devices connected to the USB upstream port and downstream port still work when the monitor is
in the power saving mode or when the power is switched off using the power button (
monitor. For this reason, power consumption of the monitor varies with connected devices even
in the power saving mode.
Note
• When the signal input from the PC is no longer detected, a message appears notifying the user
of the transition to power saving mode. The monitor enters power saving mode five seconds after
the message appears.
• When power save is set to "High" or "Low", the status of the monitor can be confirmed by
checking the color of the lamp on the power switch.
– Power indicator is green: Monitor is in normal operation mode
– Power indicator is orange: Monitor is in power saving mode
.
to select "High", "Low", or "Off", then select
Using the Monitor for a Long Time | 4
.
.
Function
) of the
17
Advertisement
Table of Contents
