Table of Contents
Advertisement
Name
Interface
Address Type
Start IP Address
End IP Address
Subnet Mask
Invert Select
Below is an example of IP objects settings.
64
Type a name for this profile. Maximum 15 characters are
allowed.
Choose a proper interface (WAN, LAN or Any).
For example, the Direction setting in Edit Filter Rule will
ask you specify IP or IP range for WAN or LAN or any IP
address. If you choose LAN as the Interface here, and choose
LAN as the direction setting in Edit Filter Rule, then all the
IP addresses specified with LAN interface will be opened for
you to choose in Edit Filter Rule page.
Determine the address type for the IP address.
Select Single Address if this object contains one IP address
only.
Select Range Address if this object contains several IPs
within a range.
Select Subnet Address if this object contains one subnet for
IP address.
Select Any Address if this object contains any IP address.
Type the start IP address for Single Address type.
Type the end IP address if the Range Address type is selected.
Type the subnet mask if the Subnet Address type is selected.
If it is checked, all the IP addresses except the ones listed
above will be applied later while it is chosen.
Vigor2910 Series User's Guide
Advertisement
Table of Contents
