Table of Contents
Advertisement
Call Filter
Data Filter
Log Flag
Pass or Block
Content Management Select a CSM profile for global IM/P2P application blocking. All
Some on-line games (for example: Half Life) will use lots of fragmented UDP packets to
transfer game data. Instinctively as a secure firewall, Vigor router will reject these
fragmented packets to prevent attack unless you enable "Accept Incoming Fragmented
UDP Packets". By checking this box, you can play these kinds of on-line games. If security
concern is in higher priority, you cannot enable "Accept Incoming Fragmented UDP
Packets".
50
Check Enable to activate the Call Filter function. Assign a start
filter set for the Call Filter.
Check Enable to activate the Data Filter function. Assign a start
filter set for the Data Filter.
For troubleshooting needs you can specify the filter log here.
None - The log function is not activated.
Block - All blocked packets will be logged.
Pass - All passed packets will be logged.
No Match - The log function will record all packets that are not
matched.
Note that the filter log will be displayed on the Telnet terminal
when you type the log -f command.
Select Pass or Block for the packets that do not match with the
filter rules.
the hosts in LAN must follow the standard configured in the CSM
profile selected here. For detailed information, refer to the section
of CSM profile setup.
Vigor2910 Series User's Guide
Advertisement
Table of Contents
