Table of Contents
Advertisement
PPP/MP Setup
IP Address
Assignment Method
(IPCP)
After finishing all the settings here, please click OK to activate them.
D
e
t
a
i
l
s
D
e
t
a
i
l
24
Always On - If the broadband connection is no longer available,
the backup line will be activated automatically and always on until
the broadband connection is restored. We recommend you to
enable this feature if you host a web server for your customers'
access.
PPP Authentication – Select PAP only or PAP or CHAP for
PPP.
Idle Timeout – Set the timeout for breaking down the Internet
after passing through the time without any action. This setting is
active only when the Active on demand option for Active Mode is
selected in WAN>> General Setup page.
Usually ISP dynamically assigns IP address to you each time
you connect to it and request. In some case, your ISP provides
service to always assign you the same IP address whenever
you request. In this case, you can fill in this IP address in the
Fixed IP field. Please contact your ISP before you want to use
this function.
WAN IP Alias - If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use WAN
IP Alias. You can set up to 8 public IP addresses other than the
current one you are using.
Fixed IP – Click Yes to use this function and type in a fixed IP
address in the box of Fixed IP Address.
Default MAC Address – You can use Default MAC Address or
specify another MAC address by typing on the boxes of MAC
Address for the router.
Specify a MAC Address – Type the MAC address for the router
manually.
P
a
g
e
f
o
r
S
t
a
t
i
c
s
P
a
g
e
f
o
r
S
t
a
t
i
c
o
r
D
y
n
a
m
i
c
I
P
o
r
D
y
n
a
m
i
c
I
P
Vigor2910 Series User's Guide
Advertisement
Table of Contents
