Table of Contents
Advertisement
Check to enable the
Filter Rule
Comments
Index(1-15)
Direction
Source/Destination IP Click Edit to access into the following dialog to choose the
52
Check this box to enable the filter rule.
Enter filter set comments/description. Maximum length is 14-
character long.
Set the PCs on LAN to work at certain time interval only. You may
choose up to 4 schedules out of the 15 schedules pre-defined in
Applications >> Schedule setup. The default setting of this filed is
blank and the function will always work.
Set the direction of packet flow (LAN->WAN/WAN->LAN). It is
for Data Filter only. For the Call Filter, this setting is not
available since Call Filter is only applied to outgoing traffic.
source/destination IP or IP ranges.
To set the IP address manually, please choose Any Address/Single
Address/Range Address/Subnet Address as the Address Type
and type them in this dialog. In addition, if you want to use the IP
Vigor2910 Series User's Guide
Advertisement
Table of Contents
