Displaying The Shot Mark Screen (Udf And Fat Hd Mode) - Sony PMW-100 Operating Instructions Manual

EXPAND CLIP screen in FAT SD Mode
120min EXPAND CLIP
00 : 00 : 00 : 00 00 : 09 : 30 : 00
01 / JAN /2009 10 : 53
JPAN0011 _01 DVCAM29.9PsF SQ
Detailed information for the clip is displayed at
the bottom of the screen.
The items other than the following are the same as
those on the normal thumbnail screen (page 65):
1.
Timecode indication
The timecode of the segmentation file at the
cursor is displayed.
2.
Duration
The duration of the segmentation file at the
cursor is displayed.
Current frame number
0000001
00 : 19 : 00 : 00
TCR 00 : 00 : 00 : 00
DUR 00 : 09 : 30 : 00
1 2
Clip Operation menu on the EXPAND CLIP
screen
UDF and FAT HD Mode
When you select a frame on the EXPAND CLIP
screen and press the SEL/SET button or the jog
dial, the Clip Operation menu pops up to enable
operations such as displaying more detailed split
displays and saving the frames after the selected
frame as different clip.
Item Function
EXPAND To decrease the number of
(COARSE) partitions of the clip
EXPAND To increase the number of
(FINE) partitions of the clip
PAUSE To set to Pause mode at the
selected frame
SET INDEX PIC To specify the selected frame for
the index frame of the clip (page
74)
SHOT MARK1 To add shot mark 1 to the selected
ADD frame (page 74)
SHOT MARK2 To add shot mark 2 to the selected
ADD frame (page 74)
SHOT MARK1 To delete shot mark 1 from the
DEL selected frame (page 74)
SHOT MARK2 To delete shot mark 2 from the
DEL selected frame (page 74)
DIVIDE CLIP To divide the clip into two clips at
the selected frame (page 75)
FAT SD Mode
You can select "PAUSE" only on the EXPAND
CLIP screen in FAT SD Mode.
Displaying the SHOT MARK
Screen (UDF and FAT HD Mode)
When one or more shot marks or recording start
marks are recorded for a single clip, you can
display only frames with those marks as
thumbnail images on the screen.
1
Select a clip on the thumbnail screen,
then press the SEL/SET button or the
jog dial.
2
Select ALL MARK, SHOT MARK1,
SHOT MARK2, or REC START
MARK from the Clip Operation menu
(page 69).
Clip Operations 73