Adding/Deleting Shot Marks (Udf And Fat Hd Mode); Changing The Index Frame (Udf And Fat Hd Mode) - Sony PMW-100 Operating Instructions Manual

SHOT MARK screen example (when ALL
MARKS is selected)
120min SHOT MARK1 SHOT
01 : 10 : 20 : 00 01 : 10 : 30 : 00
S1 S2
01 : 11 : 00 : 00 01 : 11 : 10 : 00
S1 S1
- - - - - -
01 / JAN / 2009 10 : 53 S&Q 29 / 24
JPAN0011 ( 1 )
HQ 1920 / 23 . 9 P
The detailed information of the clip is displayed
at the bottom of the screen.
The items other than the following are the same as
those on the EXPAND CLIP screen (page 72) in
UDF and FAT HD mode:
1.
Timecode indication
The timecode of the frame at the cursor on the
SHOT MARK screen is displayed.
Move the cursor to the first/last frame
When the cursor is at a user-designated position,
press the F REV and PREV buttons
simultaneously to move the cursor the first frame.
Press the F FWD and NEXT buttons
simultaneously to move the cursor to the last
frame.
Switch to the clip shot mark screen for a different
clip
When the cursor is at the first frame for a clip,
press the PREV or up button, or turn the jog dial
up to switch to the previous displayable clip shot
mark screen.
When the cursor is at the last frame for a clip,
press the NEXT or down button, or turn the jog
dial down to switch to the next displayable clip
shot mark screen.
Clip Operation menu on the SHOT MARK
screen
When you select a frame on the SHOT MARK
screen and press the SEL/SET button or the jog
dial, the Clip Operation menu pops up to permit
you further operations.
74 Clip Operations
0031 / 0031
01 : 10 : 40 : 00 01 : 10 : 50 : 00
S2 S1
- - - - - -
- - - - - -
TCR 01 : 12: 00 : 00
DUR 00 : 03 : 19 : 23
1
Item Function
PAUSE To set to Pause mode at the selected
frame
SET INDEX PIC To specify the selected frame for the
index frame of the clip (page 74)
SHOT MARK1 To delete the shot mark 1 from the
DEL selected frame (page 74)
SHOT MARK2 To delete the shot mark 2 from the
DEL selected frame (page 74)
DIVIDE CLIP To divide the clip into two clips at
the selected frame (page 75) (FAT
HD mode Only)
Adding/Deleting Shot Marks (UDF
and FAT HD Mode)
Adding a shot mark in Pause mode
Select "SHOT MARK1 ADD" or "SHOT
MARK2 ADD" from the Clip Operation menu.
Adding a shot mark on the EXPAND CLIP
screen
Select "SHOT MARK1 ADD" or "SHOT
MARK2 ADD" from the Clip Operation menu.
Deleting a shot mark
You can delete shot marks on the EXPAND CLIP
screen (page 72) or on the SHOT MARK screen
(page 73).
Select "SHOT MARK1 DEL" or "SHOT
MARK2 DEL" from the Clip Operation menu.
Changing the Index Frame (UDF
and FAT HD Mode)
You can change the index frame to another frame
you selected on the EXPAND CLIP screen (page
72) or the SHOT MARK screen (page 73).
Select "SET INDEX PIC" from the Clip
Operation menu.
Note
Even if you specify a frame other than the top frame for
the index frame, playback always begins from the top
frame when you start it from the thumbnail screen.