Direct Menu Operation - Sony PMW-100 Operating Instructions Manual

8.
Wide-conversion lens setting indicator [M]
(page 87)
Displayed when Wide Conversion of the
CAMERA SET menu is set to "On".
9.
Synchronous recording display [M]
(page 105)
Displayed when "SDI Rec Control" in the
VIDEO SET menu is set to "HD SDI Remote
I/F."
10.
NightShot mode indication (PMW-100
only) [M][A] (page 45)
11.
ND FILTER position (PMW-200 only) [M]
Displays the selected ND filter number (page
39).
12.
TLCS mode indication [M][D] (page 86)
Backlight mode
STD STD
Standard mode
Spotlight mode
13.
Steady Shot indication [M][D] (page 44)
14.
Focus mode indication [M] ([D] only in MF
mode) (page 43)
15.
White balance mode and color
temperature indications [M][D] (page 40)
16.
Picture profile indication [M][D] (page 53)
17.
Exposure position indication (PMW-100) /
Iris position indication (PMW-200) [M][D]
(page 42)
18.
Gain indication [M][D] (page 41)
19.
Shutter mode/shutter speed indication
[M][D] (page 41)
20.
Audio level meters [M]
21.
Histogram indication [M][A]
22.
Video level cautioning indication [M]
/Recommended ND filter number
indication (PMW-200 only)
23.
Depth-of-Field bar indication [M][A]
24.
Brightness level indication [M][A]
25.
Special recording mode indication [M] ([D]
only in Slow & Quick Motion Standby)
Frame Rec
Interval Rec
S&Q Motion
xx/xx fps
26.
Video Format indication [M] (page 39)
20 On-Screen Indications
Frame Rec mode
Interval Rec mode
Slow & Quick Motion mode
27.
Clip name indication [M] (page 38)

Direct Menu Operation

The settings of the items named with a suffix [D]
can be changed using the Direct menu on the
screen.
Select "All," "Part," or "Off" for Direct Menu
using "Direct Menu" (page 98) in the OTHERS
menu.
Note
When the indicator of the FULL AUTO button is lit, the
Direct Menu operation is disabled for the functions that
are forcibly set to the automatic mode in Full Auto mode
(page 37).
1
When the camcorder's status or settings
are displayed on the screen, press the
SEL/SET button (page 15) or the jog
dial (page 16).
If "Direct Menu" is set to "All" or "Part," the
cursor is displayed on one of the items for
which the Direct menu operation is
permitted.
2
Press the up/down/left/right buttons
(page 15) or rotate the jog dial to set the
cursor to the item to be operated, then
press the SEL/SET button or the jog
dial.
The Direct menu of the selected items
appears.
3
Press the up/down/left/right buttons or
the jog dial to select a setting, then press
the SEL/SET button or the jog dial.
The menu disappears, and the new setting is
displayed.