Picture Profile Items; Profile Name - Sony PMW-100 Operating Instructions Manual

Picture Profile Items

The values when "Off" is selected at "SEL" of the PICTURE PROFILE menu are shown in bold face
(example: ).
Standard
PICTURE PROFILE SET
Items

Profile Name

Changing the picture profile
name
Matrix
Adjusting the color phase
over the entire area with
matrix operations
Multi Matrix mode
(PMW-200 only)
Selecting multi-matrix
correction and color phase
adjustment for the specified
area
Multi Matrix
Makes settings related to
multi-matrix correction.
(Unselectable when "Color
Correction" is selected in the
Multi Matrix mode: PMW-
200 only)
Subitems and setting values Contents
Profile name
Standard
Setting
On / Off
Select
1 / 2 / 3 / 4 / 5 / 6
Level
–99 to +99 (±0)
Phase
–99 to +99 (±0)
R-G, R-B, G-R, G-B, B-R, B-G
–99 to +99 (±0)
Multi Matrix / Color Correction Select the setting items of the Multi Matrix or the
Setting
On / Off
1)
Area Indication
On / Off
2)
Color Detection
Execute/Cancel
Axis
B / B+ /MG- / MG / MG+ / R /
R+ / YL- / YL /YL+ / G- / G /
G+ / CY / CY+ / B-
Hue
–99 to +99 (±0)
Saturation
–99 to +99 (±0)
Set the profile name in 8 characters at maximum.
You can use upper- and lowercase alphabetics,
numerics 0 to 9, - (hyphen), _ (underscore) and
space.
Set to "On" to activate the color phase adjustment
function with matrix operations for the entire
picture.
Note
When this function is set to "Off," Multi Matrix is
also set to "Off" in synchronization.
Select the built-in preset matrix provided for
convenience.
1: Equivalent to SMPTE-240M / 2: Equivalent to
ITU-709 / 3: Equivalent to SMPTE WIDE / 4:
Equivalent to NTSC / 5: Equivalent to EBU / 6:
Equivalent to PAL
Adjust the color saturation for the entire picture
area.
Adjust the hue for the entire picture area.
Finely adjust the color phase for the entire picture
area by independently setting each of the factors.
setting items of the Color Correction.
Set to "On" to enable the multi-matrix correction,
which allows specific colors to be selected for
saturation correction in a 16-axis hue space.
Set to "On" to display a zebra pattern in the areas of
the specified color for multi-matrix correction.
Execute to detect the target color on the screen for
multi-matrix correction.
Specify a color targeted by multi-matrix correction
(16-axis mode).
Set the the hue of the color targeted by multi-matrix
correction for each 16-axis mode.
Adjust the saturation of the color targeted by multi-
matrix correction for each 16-axis mode.
Useful Functions 55